High quality of dental materials and affordable price
are the basis for skilled and widespread dentistry
 

Product Catalogue

 

OUR NEW PRODUCT !
1 syringe with material - 2 g;

Flex Flow has high plasticity before cure and high elasticity after cure, ensures highly hermetic sealing and ability to remove the temporary filling without the use of rotary instruments.

Use:
  • for temporary filling of teeth cavities for the period up to 3 months
  • for sealing abatement screws while installing dental implants.

Analogue:
Temp it Flow (Spident, South Corea)

PRIZMAFIL syringe

Catalogue section: light-cure composites

Product code: 005-013

PRIZMAFIL syringe

: 297.00 Roubles

PRIZMAFIL syringe the filling light-cure material (I-V classes). 1 syringe x 4.5 g (A1; A2; A3; A3,5; B2; C2; C4; OA3,5; OB2 colors).

 

Alternative or equivalent: Filtek P60 (3M ESPE);
Charisma Combi (Heraeus Kulzer)

 

Product code:

  • syringe A1 shade – 005;
  • syringe A2 shade – 006;
  • syringe A3 shade – 007;
  • syringe A3,5 shade – 008;
  • syringe B2 shade – 009;
  • syringe C2 shade – 010;
  • syringe C4 shade – 011;
  • syringe OA3,5 shade – 012;
  • syringe OB2 shade – 013.

 

PURPOSE. Composite high-strength and light-cure filling material "PRIZMAFIL" is used for recovery of teeth cavities of I-V classes, for adults and children.  The material is cured by visible light with wavelength of 450-500 nm.

 

PROPERTIES. "PRIZMAFIL" is composite filling material with the average dispersion of filler particles 2.8-3.2 microns. Barium-aluminum-borosilicate glass is used as the filler.

The basis of polymer matrix is comprised of urethane derivatives. The degree of inorganic filler contained in the material is about 76%. The material is easily condensed in the cavity and has transparency of 0.5.

As to its strength "PRIZMAFIL" is not inferior to most imported composite materials. It has high durability, low polymerization shrinkage.

The depth of polymerization for 10 seconds is not less than 2 mm.

During work the material should be introduced in the cavity by layers not more than 2 mm thick, the cure time of each layer is 20 seconds.

The material "PRIZMAFIL" is packaged in lightproof syringes, and is available in the following colors according to Vita scale: A1, A2, A3, A3,5, B2, C2, C4, OA3,5; OB2.

 

PHYSICAL AND TECHNICAL CHARACTERISTICS:

  • diametric strength: 46 ± 3 MPa;
  • flexural strength: 100 ± 5 MPa;
  • water absorption: 11 ± 4 mkg/mm3;
  • adhesion to enamel with the use of etching gel and light-cure "PRIZMAFIL" adhesive: 17 ± 3 MPa.

Fillings of material "PRIZMAFIL" are radiopaque, color stable, can be easily polished, which provides high cosmetic effect of the restoration.

 

THE SET CONTAINS:

  • 1 syringe with filling material - 4,5 g;
  • instruction for use.

 

STORAGE. "PRIZMAFIL" should be kept in a dark place at temperature not above +24° C. Shelf life of the material is 2 years. If refrigerated during storage, the filling material before use must be kept at room temperature for at least 1 hour.

Experts' oipnion about "Prizmafil"

Direction for use "Prizmafil"

© JSC Stomatologia-Dentistry (StomaDent) 2012-2020 .