High quality of dental materials and affordable price
are the basis for skilled and widespread dentistry

Product Catalogue


Has high strength, low acid erosion, radiopacity

  • restoration of teeth cavities classes III, V for adults and children;
  • restoration of cavities classes I, II of primary teeth;
  • restoration of non-carious tooth tissue defects;
  • sealing root dentin caries;
  • placing radiopaque gasket while working with composite filling materials;
  • restoration, with the use of sandwich technique, in the cavities of I and II classes.

Available in the following dosage:
CemFil 15 (15 g powder + 6.4 ml liquid),
CemFil 10 (10 g powder + 4.5 ml liquid),
various Vita shades


UNIREST syringe

Catalogue section: light-cure composites

Product code: 018-027

UNIREST syringe

: 495.00 Roubles

UNIREST syringe universal hybrid composite restorative light-cure material (I-VI classes). 1 syringe x 4.5 g. (A1, A2, A3, A3,5, B2, C2, C4, OA3,5, OB2 color).



Alternative or equivalent: 


Filtek Z250(3M ESPE); Spectrum TPH (Dentsply);
Herculite (Kerr); Charisma Opal (Heraeus Kulzer)



Product code:

  • syringe A1 shade – 023;
  • syringe A2 shade – 024;
  • syringe A3 shade – 025;
  • syringe A3,5 shade – 026;
  • syringe B2 shade – 027;
  • syringe C2 shade – 028;
  • syringe C4 shade – 029;
  • syringe OA3,5 shade – 030;
  • syringe OB2 shade – 031.


PURPOSE. Light-cure composite restorative material “UNIREST” is designed to restore the cavities of teeth of I - VI classes for adults and children. It is cured by visible light wavelength of 450 - 500 nm.


PROPERTIES. "UNIREST" is hybrid composite material with the average dispersion of the filler particles 0.7 micron. Barium-aluminum-borosilicate glass is used as filler. A modified derivative of BIS-GMA is the basis of the polymer matrix. The degree of inorganic filler contained in the material is about 79%. The material is easily condensed in the cavity of the tooth and has transparency of 0.80, allowing it to be used for such restoration, where cosmetic effect is especially important.

As to its strength "UNIREST" is not inferior to most imported composite materials. It has high wear resistance, low polymerization shrinkage. It has good consistency, does not leak during work, and does not stick to the tool.

"UNIREST" is well polished to a "dry light," which allows the dentist to perform a highly esthetic restoration.

Fillings of material "UNIREST" are radiopaque, color stable, can be easily polished, well imitate the tooth, which is especially important in the restoration of III - V classes.

Material "UNIREST" is packaged in lightproof syringes, and is available in the following colors according to Vita scale: A1, A2, A3, A3,5, B2, C2, C4, OA3,5, OB2, clear incise edge.

The depth of polymerization of the material for 10 seconds is at least 2 mm.



  • diametric strength: up to 52 MPa.;
  • flexural strength: 100 ± 5 MPa.;
  • water absorption: 13 ± 2 mkg./mm3.;
  • adhesion to enamel with the use of etching gel and light-cure “Primer – adhesive”: 17 ± 3 MPa.



  • 1 syringe with filling material - 4,5 g.;
  • instruction for use.


STORAGE. "UNIREST" should be kept in a dark place at temperature not above + 24° C. Shelf life of the material is 2 years. If refrigerated during storage, the filling material before use must be kept at room temperature for at least 1 hour.

Experts' opinion about "UniRest"

Direction for use "UniRest"

© JSC Stomatologia-Dentistry (StomaDent) 2012-2020 .