High quality of dental materials and affordable price
are the basis for skilled and widespread dentistry
 

Product Catalogue

 

OUR NEW PRODUCT !
1 syringe with material - 2 g;

«Flex Flow» has high plasticity before cure and high elasticity after cure, ensures highly hermetic sealing and ability to remove the temporary filling without the use of rotary instruments.

Use:
  • for temporary filling of teeth cavities for the period up to 3 months
  • for sealing abatement screws while installing dental implants.

Analogue:
Temp it Flow (Spident, South Corea)

TEMPELIGHT F

Catalogue section: for temporary filling

Product code: 081

TEMPELIGHT F

Öåíà: 385.00 Roubles

TEMPELIGHT F temporary filling light-cure material (white color), contains fluoride, high-plasticity, syringe 3 g.

 

Àlternative or equivalent: Clip F (VOCO); Òemp-it (Spident)

 

PURPOSE. Temporary high-plasticity light-cure filling material "TempeLight F" is used in therapeutic and orthopedic dentistry for the closing of dental cavities for the period up to 3 months.

 

PROPERTIES. "TempeLight F" represents a paste based on a filled polymer composition which has high plasticity before cure and high elasticity after cure, ensuring highly hermetic sealing and ability to remove the temporary filling without the use of rotary instruments, which is particularly important in cavities restoration with the use of tabs and veneers.

"TempeLight F" contains active fluoride, which ensures resistance to caries and reduces the hypersensitivity of dental tissues.

It is light cured by the wavelength of 450 - 550 nm. within 30 seconds.

The material "TempeLight F" has all the qualities required of a temporary filling material: it is bio-inert, has sufficient strength and low abradability, does not dissolve in the mouth, does not interact with drugs used in the treatment of teeth.

It has good manipulative properties, does not stick to dental instruments.

 

PHYSICAL AND TECHNICAL CHARACTERISTICS:

  • depth of cure in 30 seconds: not less than 5 mm.;
  • consistency at +37°C: 11-16 mm.;
  • water absorption: no more than 50 mkg/mm3;
  • Amount of diffusion-active fluoride that can precipitate from "TempeLight F" during 1 hour:  4 - 11 mg./ l.

 

THE SET CONTAINS:

  • 1 syringe with the material "TempeLight F", white color - 3.0 g.;
  • instruction for use.

 

STORAGE. "TempeLight F" must be stored at a temperature not above  +24°C in a dry place, protected from direct sunlight.

Shelf life of the material: 3 years.

Experts' opinion about "TempeLight" 

Direction for use "TempeLight F"

© JSC «Stomatologia-Dentistry» («StomaDent») 2012-2020 ßíäåêñ.Ìåòðèêà